DIMENSIONS • Available in different sizes – choose your preferred height from the option menu • Width varies depending on the individual digit (proportional to height)
MATERIAL & DETAILS • Made of laser cut 1/8" (3mm) thick acrylic. • Finish: Smooth, modern surface (matte or glossy depending on colour choice). • Hardware: Metal bolts included for easy installation, extra spacers for increased distance. • Instructions: Step-by-step guide shown in listing photos. • Suitable for indoor & outdoor display (UV- and weather-resistant). • Maintenance: Wipe clean with a soft damp cloth. Avoid harsh chemicals or abrasive cleaners.
INSTALLATION Stand-offs: 1. Screw the bolts to the spacers at the back of the number/letter. 2. Align the number/letter on the wall and mark the spots for the holes. 3. Drill the wall with an 6mm (Ø 1/4”) drill bit. 4. Add silicone glue into the holes. 5. Install the number/letter on the wall. 6. Affix with tape until the silicone glue dries.
Double-sided tape: 1. Pick a smooth, flat surface (avoid rough, uneven or peeling surface). 2. Position the number and check alignment (use a light pencil mark as a guide). 3. Peel off the backing from the tape. 4. Press the number firmly onto the surface, holding it in place for 20–30 seconds to ensure strong adhesion.
